Martech 79035 The Solution with 35' Hose

Product Description

Martech 79035 Cleaning, drying, and heating the atomizing air from your existing compressed air source can be accomplished with The Solution by Martech Services Company. The four-stage filtration is outfitted with an automatic moisture discharger. Then the clean air is further filtered to remove moisture content for super dry air. A controller, with digital outputs, allows user to set the temperature of the atomizing up to 165 degrees F. The Solution is shipped complete with a 3/8” ID x 35’ spray air hose. The Solution is a complete compressed air system designed to clean, dry, and heat the atomizing air for today’s spray paint requirements. It is easy to use, simple to install, and affordable to maintain. Works well with both waterborne and solvent based paint systems.

Easy to install, on the exterior of a new or existing spray booth Works with the existing compressed air system Provides clean, dry, filtered air to .01 micron Maximum sweep air of only 3% to 4% Easy, low cost maintenance of the four-stage filter Automatic moisture discharger, standard Panel mounted, ready to install, includes all necessary fittings Self-relieving pressure regulator with gauge Operates on 110 VAC with less than 4 amp draw Digital control panel to set the atomizing air temperature from 100° F to 165° F 35' x 3/8" heated hose assembly with 1/4" NPT large bore male end System on/off control with LED indicator lamp Flow rate at a maximum of 35 CFM Maximum input pressure of 150 PSI