Reading Technologies Inc EH4000 Eliminator II 1/2" ?û Regulator and Gauge Assembly

Product Description

Reading Technologies Inc EH4000 Eliminator Ii 1/2" – Regulator & Gauge Assembly- Designed to provide low humidity air for one gun spraying.
Patented "Inverse Flow™" technology. Removes water, dirt, oil and water vapor.
Activated carbon pre-filter with automatic drain. Second stage desiccant final filter, no desiccant dust migration! 1/2" NPT Inlet, 1/4" NPT Outlet.
1.0 micron or larger and activated carbon oil absorption to 0.003ppm. Up to 30 scfm flow capacity.
With spin-on, spin-off element maintenance, this unit is a best seller and perfect for prep and in the paint booth.
Perfect for waterborne and solvent borne finishes. 1/4" regulator and gauge assembly.
Continuous Low Dew Point Operation, Easily Maintained and Serviced, Upwards Compressed Air Drying, Built-in Dew Point w/ Indicator, No Desiccant Dust Migration, and Low Pressure Drop Design.

Activated Carbon Prefilter “Inverse Flow™” Technology Automatic Drain in 1st Stage Built-in Final Filter Spin-on/Spin-off Desiccant Canisters Wall Mountable Designs Applications: Operate only one paint gun. Do not attempt to operate multiple paint guns with this unit. Provide dry, oil-free air to -40°F dew points, virtually free of dried particulate. Be installed as close as possible to the point-of-use and as far as possible from the compressor.

Port Size Inlet: 1/2” - Outlet: 1/4” Thread Style NPT Dryer Design Manual, Refrigerated Recommended Temp 100 Degrees Fahrenheit Maximum Pressure* 150 PSIG Dryer Capacity -40 Degrees Fahrenheit Filter Capacity 1.0 micron and larger Activated Carbon Oil Absorption to 0.003ppm Flow Capacity 30 SCFM Differential Pressure <5.0 PSID at Rated Flow Height 19" Width 15" Depth 5"