Description
The Dent Fix GLUEMAX Mini Dent Lifter is a compact glue pull lifter built for the final stage of paintless dent repair on steel and aluminum panels. Getting the dent out is only half the job. The difference between a good repair and a perfect one happens in the final pulls, and that takes control.
Pull to the tension you want, then spin the locking collar down the shaft until it seats against the body. The pull holds right where you set it, so you can knock down highs around the impact site with the Dent Fix Blending Hammer 4 PC Set (DF-BHSET) while the low stays supported, or step back and check the panel from another angle before the next pull.
A built-in tab lock secures the tab to the head through every pull, with no separate adapter to buy or misplace. An engineered spring balance gives strong pulling force with a smooth, controlled feel that reduces hand fatigue, and 360° positioning gets the lifter around body lines, trim and tight spaces. Dent Fix part number DF-GM600SP.
Key Features & Benefits
- Locking collar holds the pull exactly where you set it
- Built-in tab lock, no separate adapter needed
- Controlled, precise pulls for final finishing work
- Hold tension while blending highs with the Dent Fix Blending Hammer 4 PC Set (DF-BHSET)
- Engineered spring balance for strong, smooth pulling force
- Optimized spring tension reduces hand strain on repeated pulls
- 360° positioning for body lines, trim and tight spaces
- Quick spin of the collar to lock, release to reset for the next pull
- Compact 2 lb tool built for daily shop use
Package Includes
- (1) GLUEMAX Mini Dent Lifter, DF-GM600SP
Ideal Applications
- Final finishing and fine tuning of glue pull repairs
- Steel and aluminum panels
- Small to medium dents, door dings and hail damage
- Body lines and areas with limited access
- Panels where back-side access is restricted or not practical
- Collision repair shops, PDR technicians and mobile repair specialists
Specifications
- Brand: Dent Fix
- Part Number: DF-GM600SP
- Weight: 2 lbs
- Dimensions (at rest): 9" H x 9" W x 3.5" D
- Height at Full Pull: 9.5"
- Pull Travel: Approx. 0.5"
- Construction: Lightweight composite body with metal tab head, tab lock, shaft and spring components
- Panel Compatibility: Steel and aluminum
- Positioning: 360° rotation
- Spring: Engineered, tuned pulling resistance
- Tab Retention: Built-in tab lock
- Pull Lock: Locking collar
- Manual: GLUEMAX Mini Dent Lifter Operating Manual (PDF)